|
Compact Size - just 80mm x 233.35mm and may be mounted in any convenient position
inside the system. No system slots are required.
|
|
Dual Serial Ports - M2 alarm module may be monitored by 2 host systems
simultaneously. Card can also be connected to a
USB port using a readily available and low cost
USB-Serial adaptor cable.
|
|
10/100Mb
Ethernet Port (RJ45) - for remote access,
monitoring and error reporting. On board web
status page and SNMP trap support.
|
|
On Board Processor - monitor system without dependence on host
system software or bus type. Firmware code flash
upgradeable through serial ports for future
enhancements.
|
|
16 x Tachometer Fan - measure fan speeds up to 10000rpm.
|
|
8
x Temperature Inputs - measure chassis temperatures from -23 to +100°c.
|
|
16 x User Definable Inputs or Outputs
- configurable as outputs for status LED’s or 5V
fail signals, or as Inputs for chassis intrusion
switches, PSU status, other fail signals etc. 4
of these I/O’s can also be configured (with
jumpers) to act as relay drivers. Levels are
standard TTL range.
|
|
Dedicated
Watchdog Reset Connector - reset
system in the event of system lockup.
|
|
Battery
Connector -
provides power to
M2 card in event of power failure
(option)
|
|
System
Voltages - connector for measuring
+12v,-12v,+5v,+3.3v
|
|
Simple
Power
Connector - measure PSU voltages and supply
power to A/C module.
|
|
User
Voltage Sense Inputs - 2 x
additional user defined
voltage inputs up to +/-60v.
|
|
On
Board Speaker
-
for
generating alert condition
|
|
On
Board Event Logging
|
